2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 371Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 371

32If removed, install the spark plug and tighten to 1.7 kg-m (12 ft-Ib)Lower front: One cap screw, nut, spacer, and washerTighten
nut (topside of engine)Tighten only until snug ALower rear: One cap screw and nut with flat washerTighten only until snug
3Tighten the engine mounting fasteners to the following specifications BUpper rear: Loosely fasten the left-side engine mount-to-frame
cap screws; then install the cap screw wnut and flat washerTighten only until snug ALower rear and Lower front to 5.5 kg-m
(40 ft-Ib)BUpper front (inside the bracket) and Upper front (topside of engine) to 2.8 kg-m (20 ft-Ib)CUpper rear left-side