2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 380Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 380

NOTE: Turn the low speed fuel screw clockwise until it is lightly seated; then turn it counterclockwise the recommended number
assemblyAccount for the spring and washerASSEMBLING 3Install the slow jetTighten securely4Install the main jet into the needle
jet holder and tighten securely; then install the needle jet holder assembly into the carburetor and tighten securely5Place
the float assembly (with float needle valve) into position and secure to the carburetor with the float pin 1Screw the idle
speed adjuster into the carburetor making sure the washer and spring are properly positioned2Install the low speed fuel screw