2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 382Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 382

3Place the throttle cable into position and secure by tightening the outer jam nut 6Position the carburetor in the air cleaner
DO NOT place any non-metallic components in parts-cleaning solvent because damage or deterioration will result 5Place the
throttle actuator cover into position on the carburetor; then secure with the screw 1Place all metallic components in wire
basket and submerge in carburetor cleaner2Soak for 30 minutes; then rinse with fresh parts-cleaning solvent3Wash all non-metallic
components with soap and waterRinse thoroughly4Dry all components with compressed air only making sure all holes, orifices,
and channels are unobstructed5Inspect the carburetor body for cracks, nicks, stripped threads, and any other imperfections