2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 389Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 389

NOTE: If the oil pressure is lower than specified, check for an oil leak, damaged oil seal, or defective oil pump NOTE: If
(Input) Hose (Output) Fitting Cap Screw a-Ring Fitting 2501300 3Remove the oil cooler from the frameINSTALLING 0737-536 1Place
the collar into position in the frame2Secure the cooler to the frame with the cap screws, washers, collars, and grommets
1234567891011121314Oil Cooler Assy Shroud Fan Thumb Screw Screen Machine Screw Grommet Drain Plug a-Ring Bushing Fitting
Fitting Cap Screw Washer 151617181920Collar Clamp Cap Screw a-Ring Nut wWasher Hose 0737-082 REMOVING NOTE: It is not necessary
to drain the engine oil for this procedureAL651D 3Install the hoses onto their respective fittings and secure with the clamps