2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 391Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 391

The cooling system capacity is approximately 2.9 (3 U.Sqt)The cooling system should be inspected daily for leakage and damageAlso,
the fanfan shroud assembly from the radiator CAUTION After operating the ATV for the initial 5-10 minutes, stop the engine,
allow the engine to cool down, and check the coolant levelAdd coolant as necessaryCC863 Coolant Temperature Switch OFF to
ON ON to OFF 115 (239 F)Approx 108 (226 F)Approx CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked,
or damaged in any way, replacement is necessary Radiator 1Flush the radiator with water to remove any contaminants2Inspect
the radiator for leaks and damage3Inspect all hoses for cracks and deterioration4Inspect all fasteners and grommets for damage
or wearINSTALLING 1Position the fanfan shroud assembly on the radiator; then secure with existing hardware2Place the radiator
with grommets and collars into position on the frame; then install the cap screws and nutsTighten securely' Radiator- 0732-411