2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 397Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 397

2Connect the two coolant hoses to the water pump and secure with the clamps NOTE: While the cooling system is being filled,
the left-front wheel-well, secure the fender to the frame with the two torx-head cap screwsTighten securely 4Place the footrest
into position on the frame and loosely secure with four cap screws; then secure the front and rear fenders to the footrest
with the four torx-head cap screwsTighten the four torx-head cap screws securely; then tighten the two mm cap screws to 2.8