2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 434Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 434

14Remove the upper -arm lock nuts and cap screws; then remove the A-arms AF896D 10Remove the upper ball oint cap screws taking
not to damage the seals with the axle end12Support the axle to not allow it to drop or hang 16Remove the inner fender panels
CAUTION The axle must be supportedIf the axle is allowed to drop or hang, damage to the inner CV joint may occur 13Remove
the lower shock boltsAccount for the lock nuts; then move the shocks aside and secure them with strapAF902D NOTE: To remove