2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 442Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 442

5Install the shift fork shaft wisp ring into the gear housing making sure the shaft O-ring is positioned to the inside CC884
rear gear case, the nut has left-hand threads 6Install the shift fork assembly making sure the fork leg is facing upwardApply
small amount of oil to the gasket; then install the gasket CC893 CC890 4Place punch on the edge of the nut in the oil gallery
area; then using hammer, stake the nut to ensure that the nut will remain securely tightened 7Place the input shaft assembly