2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 445Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 445

4Place punch on the edge of the nut in the oil gallery area; then using hammer, stake the nut to ensure that the nut will
may vary from model to modelThe technician sould use discretion and sound judgment NOTE: Prior to installing the seal, apply
grease to the seal outside diameter 4Install the seal into the housing pressing evenly on the outside edge until the seal
is seated 1Remove the seal using seal removal tool 5Repeat steps 1-4 for the opposite sideINSTALLING DIFFERENTIAL 2Using