2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 453Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 453

ACTRear Suspension REMOVING 1Place the ATV on support stand (positioned just in front of and behind the footrest on each
assembly rearward allowing the propeller shaft to disengage and the final drive boot to separate from the drive housingCC783
DISASSEMBLING CAUTION 1Remove the cap screws securing the gear case panel; then remove the panel from the gear case Care
should be taken not to damage the brake cablelhose when laying the calipers asideDo not allow the calipers to hang from the
brake cablelhose 4Remove the lower shock absorber cap screws and hex nuts; then disengage the shock absorbers from the axle