2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 456Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 456

6Rotate the bearing housing until the brake caliper mounting holes are on the top side; then secure the axle retainer assemblyaxle
on the axle housings and case; then secure with four cap screws and hex nutsTighten to 4.8 kg-m (35 ft-Ib ) 3Place the shock
absorber into the frame mounts and secure using the cap screws and hex nuts tightened to 4.8 kg-m (35 ft-Ib) CAUTION 6Install
the wheels and tighten to 5.5 kg-m (40 ft-Ib)7Remove the ATV from the support stand Do not tighten nuts beyond the 4.8 kg-m
(35 ft-Ib) specification or the shock eyelet or mount WILL be damaged 4Place the brake calipers into position on the axle
retainer assembly; then secure with the cap screwsTighten the auxiliary caliper to 2.1 kg-m (15 ft-Ib) and the hydraulic