2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 458Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 458

2Apply grease to hub sealing area and on the splines 4Remove the brake caliperAF736D 3Install the hub assembly onto the splines
for cracks or warping4Inspect the sealing area of the hub for pits5Inspect the hub splines for signs of wear6Inspect the
hub for cracksINSTALLING 1Secure the brake disc to the hub with the four cap screws coated with blue Loctite #243Tighten
to 2.1 kg-m (15 ft-lb) 5Place the washer onto the shaft; then secure the hub assembly with the nutTighten only until snug6Secure
the brake caliper to the knuckle with the two cap screwsTighten the auxiliary caliper to 2.1 kg-m (15 ft-lb)Tighten the hydraulic