2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 459Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 459

REMOVINGDISASSEMBLING 1Secure the ATV on support stand to elevate the wheel; then remove the wheel Make sure the ATV is solidly
of the ATV and do not reuse brake fluid 8Install the wheel and tighten to 5.5 kg-m (40 ft-Ib) 3Remove the brake hose from
the caliper; then remove the caliper 9Remove the ATV from the support stand CLEANING AND INSPECTING 1Clean all caliper components
(except the brake pads) with parts-cleaning solvent Hydraulic Brake Caliper NOTE: The brake caliper is non-serviceable component;