2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 470Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 470

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
4.8 kg-m (35 ft-lb )5Secure the A-arm assemblies to the frame mounts (from step 2)Tighten the cap screws to 4.8 kg-m (35
ft-lb) 1Apply green Loctite #609 to the entire outside diameter of the ball joint; then install the ball joint into the A-arm
and secure with the cirdip CAUTION Do not tighten the nut beyond the 4.8 kg-m (35 ft-Ib) specification or the shock eyelet
or mount WILL be damaged 6Install the knuckle assembly onto the ball joints and secure with cap screwsTighten to 4.8 kg-m
(35 ft-lb) 2Install the A-arm assemblies into the frame mounts and secure with the cap screwsOnly finger-tighten at this