2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 471Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 471

7Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-Ib); then install new cotter pin and spread the
kg-m (75 ft-Ib)AF618D 8Apply grease to hub sealing area and on the drive axle splines; then install the hub assembly onto
the drive axle 13Install new cotter pin and spread the pm to secure the nut 14Install the wheel cap9Insert the hub seal onto
the drive axle; then position it into the hub15Install the wheel and tighten to 5.5 kg-m (40 ft-Ib) CD010 CD006 10Place the