2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 472Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 472

Rear A-Arms (FISRear Suspension) REMOVING 1Secure the ATV on support stand to elevate the wheels Make sure the ATV is solidly
the cap screws and lock nuts securing the A-arms to the frame; then remove the A-arms5Remove the two brake calipers (right
side only) NOTE: Do not allow the brake calipers to hang from their cablehose NOTE: If removing the upper right A-arm, it
will be necessary to disconnect the brake hose and brake cable from the A-arm 6Remove the cap screws and lock nut securing
the shock absorber to the frame and lower -arm; then remove the shock absorber7Remove the cap screws securing the boot guard
to the lower A-arm CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement