2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 478Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 478

REMOVING 1Remove the seat (see Seat in this section)2Tum the gas tank valve to the OFF position; then remove the left-side
pin and slotted nut securing each tie rod end to the steering post armRemove the tie rod ends from the arm9On the 400500
models, remove the cap screws securing the instrument pod 6Remove the cotter pin and slotted nut securing the side tie rod
ends to the knucklesRemove the tie rod ends from the knuckles; then remove the tie rods7Remove the cap screws securing the