2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 479Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 479

11Remove the four cap screws securing the handlebar caps (blocks) to the steering post; then move the handlebar out of the
all welded deteriorationareas for cracks or 12Remove the two cap screws securing the upper steering post bearing housings
to the frame 5Inspect the steering post and steering-post brackets for cracks, bends, or wear6Inspect the bearing halves,
bearing caps, and bearing housings for cracks or wear7Inspect the handlebar tube for cracks, wear, or unusual bends8Inspect
the handlebar grips for damage or wearINSTALLING 13Remove the steering post 1Place the steering post into position; then