2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 480Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 480

2Place the handlebar into position and secure with the handlebar caps (blocks)Tighten the four cap screws to 2.8 kg-m (20
with the machine screw, body collar, and the retaining ring (opposite the screw) 3On the 250300 models, place the ignition
switch into position; then place the console in position and secure with the screws, spacer, and the retaining ring (opposite