2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 484Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 484

NOTE: During assembling, new cotter pins should be installed 3Install new seal into the knuckle making sure the seal is flush
the knuckle to the upper and lower ball joints and secure with the two cap screwsTighten to 4.8 kg-m (35 ft-Ib) 8Install
the hub assembly onto the splines of the shaft 6Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-Ib);