2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 497Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 497

INSTALLING MUFFLER 1Install the muffler on the frame and into the mufflerexhaust pipe juncture accounting for all mounting
the rack upward and remove from the frameCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged
in any way, replacement is necessary 6Disconnect the taillight wiring harness three-prong connector; then remove the fenderCLEANING
AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all
rear rack components with parts-cleaning solvent2Inspect all welds for cracking or bending3Inspect threaded areas of all
mounting bosses for stripping4Inspect for missing decals andor reflectorsINSTALLING 1Clean all rear fender components parts-cleaning
solvent and soap and water 2Inspect side panels, fender extensions, and rear fenders for cracks and loose rivets3Inspect
threaded areas of all mounting bosses for stripping4Inspect for missing decalsINSTALLING 1Place the rack into position on