2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 500Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 500

REMOVING 1Unplug the three-prong connector and free the taillight wiring harness from the fraIlle2Remove the torx-head cap
connector, lens, base, cap screws, and socket for daIllage2Inspect all wires for corroding, pinching, and cracking3Inspect
the bulb for wattage, voltage, and proper operationINSTALLING BVerticalLoosen nut (B) and adjust for proper aimingTighten
the nut securely WARNING Do not operate the ATV unless the headlight beam is adjusted properlyAn incorrectly adjusted beam
will not provide the operator the optimum amount of light 1Place the assembly into position on the frame and secure with