2004 650 Twin Arctic Cat ATV Service Manual, Page 24Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 24

14Mode Button Used (in conjunction with the OdometerTrip MetersHour Meter) to shift the odometertrip metershour meter display
3To bleed the brake system, use the following procedureARemove the cover and fill the reservoir with DOT Hi-Temp Brake Fluid
(pn 1639-799)BInstall and secure the cover; then slowly compress the brake lever several timesCRemove the protective cap,
install one end of clear hose onto one FRONT bleeder screw, and direct the other end into container; then while holding slight
pressure on the brake lever, open the bleeder screw and watch for air bubblesClose the bleeder screw before releasing the
brake leverRepeat this procedure until no air bubbles are present The hydraulic brake systems have been filled and bled at
the factoryTo check andor bleed hydraulic brake system, use the following procedure1With the master cylinder in level position,
check the fluid level in the reservoirIf the level in the reservoir is not visible in the sight glass, add DOT brake fluid