2004 650 Twin Arctic Cat ATV Service Manual, Page 42Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 42

Disassembling Crankcase Half 1Using press, remove the crankshaft from the right case; then mark matching marks on the connecting
side clearance is 0.7 mm (0.028 inConnecting rods or crankshaft will have to be replaced if measurement exceeds specificationKX263
4Remove the shift shaft spring anchor (A); then remove the shift shaft (B) ! CAUTION Connecting rods are machined with the
big end caps installedSevere engine damage will result if the caps are not installed on their respective rods 2Remove the
connecting rod nuts; then remove the connecting rods (A) and caps (B) 5Remove the reverse idler shaft (A), spacer (B), and