2004 650 Twin Arctic Cat ATV Service Manual, Page 55Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 55

2Place the driven pulley assembly onto the compressor tool base engaging the dowel pins into appropriate holes in the fixed
guide pins (A) 7Remove the spacers; then thoroughly clean all parts in high flash-point solventKX280 4Relax the spring by
removing the nut and spring holder; then remove the spring seats (A), spring (B), and thrust plate (C) Inspecting 1Inspect
the pulley faces for wear, galling, or grooving2Inspect the O-rings on the movable face for nicks, tears, or swelling 5Make