2004 650 Twin Arctic Cat ATV Service Manual, Page 56Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 56

4Inspect the pins and bushings for wear, flat spots, looseness, or crackingAssembling 1Place the fixed face of the driven
in the movable face with multi-purpose grease 5Loosen the nut and remove the spring holder; then remove the driven pulley
assembly from the driven pulley compressorDRIVE CLUTCH ASSEMBLY Disassembling 3Apply multi-purpose grease to the O-rings
and grease seals on the movable face; then install on the fixed face making sure the alignment marks are properly aligned
1Hold the drive clutch holder in suitable vise; then set the clutch on the holder engaging the holding pins with the clutch