2004 650 Twin Arctic Cat ATV Service Manual, Page 64Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 64

ATV2074A 7Install the inserts into the connecting rods and caps; then use plastigauge (A) to measure connecting rodcrankshaft
be 0.028-0.052 mm (0.0011-0.0020 in standard with maximum service limit of 0.09 mm (0.0035 in 12Install the idler shaft (A)
with gear assembly (B), spacer (C), and spacer (D); then install spacer (E) with the stepped side (F) directed outward ATV2072A
9Clean off all traces of plastigauge from the crankshaft and inserts; then assemble on the crankshaft using clean, molybdenum
disulfide oil on the inserts (A)Make sure that the "OUT" marks (B) on both connecting rods are directed towards the outside