2004 650 Twin Arctic Cat ATV Service Manual, Page 67Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 67

7Place the bearing housing into the holding fixture; then apply blue Loctite #242 on the threads of the bearing retainer
the bearing, tighten to 16 kg-m (116 ft-lb) 11Place the bearing housing (A) into the holding fixture (B); then apply blue
Loctite #242 to the threads of the bearing retainer (C)Install the bearing retainer and tighten to 14 kg-m (101 ft-lb) 9Press
the outer ball bearing in until it is bottomed out 12Secure the output shaft holding fixture (B) and spacer (C) in vise;
then hold the housing assembly (A) and install the output shaft (D) in the housing13Apply blue Loctite #242 to the threads