2004 650 Twin Arctic Cat ATV Service Manual, Page 72Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 72

32To prepare the intermediate shaft chain tensioner (A) for installation, release the stopper (B); then push the rod (C)
assembly (A) to the crankcase with cap screws (B); then tighten to 0.9 kg-m (78 inlb) and remove the wire (C)KX346 34Apply
grease to the O-ring (A); then install the cover (B) into the right side of the crankcase with the tapped hole (C) directed
outward 2Install the two bevel washers (A) with the concave side directed towards the driven pulley; then use the pulley