2004 650 Twin Arctic Cat ATV Service Manual, Page 73Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 73

3Loop the belt over the driven pulley; then install the drive clutch with holding tool (A) with cap screws (B) referenced
(see Section 2) AT THIS POINT The drive clutch holder can be left installed to hold the crankshaft for left-side component
installation Installing Left-Side Components 1Install new circlip (A) securing the oil pump rotor (B) in rotor (C); then
apply clean engine oil to the rotors and shaft (D) 4Install the upper chain guide (A) with the tab (B) directed downward;
then install the lower chain guide (C) and collar (D)Tighten the chain guide attaching bolts to 0.9 kg-m (78 inlb) ATV2094