2004 650 Twin Arctic Cat ATV Service Manual, Page 74Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 74

5Apply grease to the O-ring (A); then install the pin (B), spring (C), and oil pump chain tensioner bolt (D) and tighten
the starter clutch gear KX356 KX353 10Ensure that the alignment pins (A) are installed; then install the bearing (B) 7Install
the pick-up coil (A) and stator (C) and tighten cap screws (B) to 1.3 kg-m (9.5 ft-lb); then install the lead grommets (D)
in the alternator cover 11Apply grease to the alternator cover oil seal; then install the cover (B), cover cap screws (A),
and clamps (C)Tighten the cap screws to 0.9 kg-m (78 inlb) 8Install the one-way clutch so the flange (A) fits on the recess