2004 650 Twin Arctic Cat ATV Service Manual, Page 77Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 77

ATV2101 7Install the rear camshaft (A) identified by the groove (B) 10Install pin (A), spring (B), washer (C), and chain
surface of the cap and the upper surface of the cylinder head ATV2102 9Release the ratchet (A) and press the push rod (B)
into the camshaft chain tensioner body; then install on the rear cylinder and tighten the cap screws to 0.9 kg-m (78 inlb)
ATV2103 12Install the valve cover making sure that the rocker arms and adjuster screws do not have pressure on them; then
tighten the valve cover cap screws as follows: 1-4 with washers, 0.9 kg-m (78 inlb); and 6, 1.0 kg-m (87 inlb); (A) 1.0 kg-m