2004 650 Twin Arctic Cat ATV Service Manual, Page 87Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 87

2Remove the four screws (A) securing the float chamber (B); then remove the float chamberAccount for the O-ring seal KX373A
cleaning solvent safe for plastic 1Place all plastic components in wire basket and submerge in carburetor cleaner2Soak for
30 minutes; then rinse with fresh parts-cleaning solvent3Wash all non-metallic components with soap and waterRinse thoroughly4Dry
all components with compressed air only making sure all holes, orifices, and channels are unobstructed5Inspect the carburetor
body for cracks, nicks, stripped threads, and any other imperfections in the casting6Inspect the vacuum pistondiaphragm for
cracks, imperfections in the casting, or cracks and tears in the rubber 4Remove the screws (A) and pump cover (B) from the