2004 650 Twin Arctic Cat ATV Service Manual, Page 94Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 94

! CAUTION After operating the ATV for the initial 5-10 minutes, stop the engine, allow the engine to cool down, and check
and collars into position on the frame; then install the cap screws and nutsTighten securely3Install the upper and lower
coolant hoses; then secure with hose clamps0732-411 REMOVING 1Drain the coolant at the engine2Remove the front rack (see
Section 8)3Remove the front bumper and grille assembly (see Section 8)4Remove the upper and lower coolant hoses5Remove the
cap screws and nuts securing the radiator to the frame6Disconnect the fan wiring from the main wiring harness; then remove
the radiatorfan assembly and account for the grommets and collars7Remove the fanfan shroud assembly from the radiatorAF734D