2004 650 Twin Arctic Cat ATV Service Manual, Page 97Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 97

ATV2115 6Press ball bearing (A) into the alternator cover from the inside until it is bottomed; then using suitable socket
Electric Fuel Pump AT THIS POINT Prior to removing the electric fuel pump, the following check should be performed to determine
that removal is necessary ! WARNING ATV2118A 7Carefully clean the sliding surfaces of the new mechanical seal with clean
solvent; then apply the coolant to the sliding surface to provide initial lubrication8Apply coolant to the surfaces of the
rubber seal and sealing seat (A); then press the rubber seal (B) and sealing seat into the impeller until the seat bottoms
out Whenever any maintenance or inspection is made on the fuel system during which there may be fuel leakage, there should
be no welding, smoking, open flames, etc in the area 1Turn the ignition switch ON and listen for momentary "whirring" sound