2004 650 Twin Arctic Cat ATV Service Manual, Page 121Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 121

INSTALLING 1Route the new wiring harness down through the opening; then place the speedometer into position and secure with
connector and the belt indicator light switch connector ATV2208K 2Install the Reset Connector (pn 0486-161) into the forward
4-pin connector; then turn the ignition switch to ONAllow the belt indicator light to flash for 10 seconds or more; then
turn the ignition switch to OFFNOTE: The light will flash rapidly for seconds; then it will flash slowlyAllow the light to
flash slowly for at least seconds before turning the ignition switch offATV2142 3Remove the reset connector and connect the
4-pin connectors and the belt indicator light switch connector4Turn the ignition switch to the ON position and confirm that