2004 650 Twin Arctic Cat ATV Service Manual, Page 133Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 133

NOTE: To remove the panels, there will be torx-head screw and three cable ties per side 16Using T-30 torx wrench, remove
the frame with the driveshaft attachedAG925 17Remove the lower differential mounting boltAccount for lock nut and washers
Disassembling Input Shaft Housing 18Remove the upper differential mounting boltAccount for lock nut and washers NOTE: This
procedure can be performed on rear gear case 1Using T-40 torx wrench, remove the cap screws securing the input shaft housing
cover2Using rubber mallet, remove the coverAccount for gasketRemove the fork, collar, and springNote the location of all