2004 650 Twin Arctic Cat ATV Service Manual, Page 146Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 146

7Remove the tie rod from the steering knuckle CD019 AF896D 8Remove the cap screw and lock nut securing the lower shock eyelet
stationary, pull the top of the steering knuckle out and down until it is free of the drive axle11Place drain pan under the
ATV to contain any oil leakage; then using slide hammer, remove the drive axle 2Wipe away excess grease to access the retaining
ringUsing an awl or circlip pliers, remove the circlip CLEANING AND INSPECTING NOTE: Always clean and inspect the drive axle
components to determine if any service or replacement is necessary 1Using clean towel, wipe away any oil or grease from the