2004 650 Twin Arctic Cat ATV Service Manual, Page 151Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 151

3Remove the nut securing the hubAccount for washer4Remove the brake caliper 3Install the hub assembly onto the splines of
1Clean all hub components2Inspect all threads for stripping or damage3Inspect the brake disc for cracks or warping4Inspect
the sealing area of the hub for pits5Inspect the hub splines for signs of wear6Inspect the hub for cracksINSTALLING 1Secure
the brake disc to the hub with the four cap screws coated with blue Loctite #243Tighten to 2.1 kg-m (15 ft-lb)2Apply grease
to hub sealing area and on the splinesCD007 7Tighten the hub nut (from step 5) to 10.4 kg-m (75 ft-lb) for the front or 17.5