2004 650 Twin Arctic Cat ATV Service Manual, Page 158Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 158

11Remove the circlip from the ball joint; then remove the ball joint from the A-arm 2Install the A-arm assemblies into the
Loctite, grease, oil, or dirt for installing purposes3Inspect the A-arm for bends, cracks, and worn bushings4Inspect the
ball joint mounting holes for cracks or damage5Inspect the frame mounts for signs of damage, wear, or weldment damageINSTALLING
1Apply green Loctite #609 to the entire outside diameter of the ball joint; then install the ball joint into the A-arm and
secure with the circlipAF627D 4Secure the lower eyelet of the shock absorber to the upper A-armTighten nut to 4.8 kg-m (35