2004 650 Twin Arctic Cat ATV Service Manual, Page 159Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 159

6Install the knuckle assembly onto the ball joints and secure with cap screwsTighten to 4.8 kg-m (35 ft-lb) 10Secure the
During assembly, new cotter pins should be installed 11Secure the hub nut (from step 10) to the shaftaxleTighten to 10.4
kg-m (75 ft-lb)12Install new cotter pin and spread the pin to secure the nut KX041 AF618D 13Install the wheel cap14Install
the wheel and tighten to 5.5 kg-m (40 ft-lb) 8Apply grease to hub sealing area and on the drive axle splines; then install