2004 650 Twin Arctic Cat ATV Service Manual, Page 160Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 160

Rear A-Arms REMOVING 1Secure the ATV on support stand to elevate the wheels ! WARNING Make sure the ATV is solidly supported
screws and lock nuts securing the A-arms to the frame; then remove the A-armsNOTE: If removing the upper right A-arm, it
will be necessary to disconnect the brake hose and brake cable from the A-arm 6Remove the cap screws and lock nut securing
the shock absorber to the frame and lower A-arm; then remove the shock absorber7Remove the cap screws securing the boot guard
to the lower A-arm CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement
is necessary 1Clean all A-arm components in parts-cleaning solvent2Inspect the A-arm for bends, cracks, and worn bushings3Inspect