2004 650 Twin Arctic Cat ATV Service Manual, Page 161Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 161

2Slide the knuckle onto the drive axle and into position on the A-arms; then secure the knuckle to the A-arms with cap screws
only until snug6Secure the brake caliper to the knuckle with the two cap screws (right side only)Tighten the hydraulic caliper
to 2.8 kg-m (20 ft-lb)NOTE: Ensure that the brake hose and brake cable are properly routed and secured to the upper A-armKX041
9Secure the shock absorber to the frame with cap screw and new lock nutTighten to 4.8 kg-m (35 ft-lb)10Secure the shock absorber
to the lower A-arm with cap screw and new lock nutTighten to 2.8 kg-m (20 ft-lb)11Secure the boot guard to the lower A-arm