2004 650 Twin Arctic Cat ATV Service Manual, Page 166Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 166

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
switch into position; then place the instrument pod into position and secure with the ignition switch retaining nut 5Inspect
the steering post and steering-post brackets for cracks, bends, or wear6Inspect the bearing halves, bearing caps, and bearing
housings for cracks or wear7Inspect the handlebar tube for cracks, wear, or unusual bends8Inspect the handlebar grips for
damage or wearINSTALLING 1Place the steering post into position; then place the upper steering post bearings and housings
on the steering post and install the two cap screws through the housings and into the frameTighten the cap screws to 2.8