2004 650 Twin Arctic Cat ATV Service Manual, Page 170Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 170

6Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-lb); then install new cotter pin and spread the
the hub nut (from step 10) to the shaftTighten to 10.4 kg-m (75 ft-lb)12Install new cotter pin and spread the pin to secure
the nutAF736D 13Install the wheel cap14Install the wheel and tighten to 5.5 kg-m (40 ft-lb) 8Install the hub assembly onto
the splines of the shaft 9Place the washer onto the shaft; then secure the hub assembly with the nutTighten only until snug