2004 650 Twin Arctic Cat ATV Service Manual, Page 177Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 177

Footrests REMOVING Belly Panel REMOVING 1Remove the cap screws securing the fender extension to the footrestAccount for all
solvent2Inspect the footrest weldments for cracks or unusual bends3Inspect all tubing for cracks or unusual bendsINSTALLING
1Remove the cap screws securing the muffler to the frame and account for all mounting hardware2Loosen the clamp at the mufflerexhaust
pipe juncture; then remove the nuts securing the rear exhaust pipe to the cylinder and remove the muffler 1Connect the foot
brake cable to the brake pedal (right-side footrest)2Place the footrest into position on the frame and loosely secure with
the four cap screws3Secure the fender extension to the footrest with existing hardwareTighten securely4Tighten the 10 mm
footrest cap screws (from step 2) to 5.5 kg-m (40 ft-lb); then tighten the mm cap screws (from step 2) to 2.8 kg-m (20 ft-lb)5Connect
the foot brake switch to the main wiring harnessEnsure that the harness is properly secured to the frame and away from any