2004 650 Twin Arctic Cat ATV Service Manual, Page 182Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 182

Hand Brake Lever Master Cylinder Assembly NOTE: The master cylinder is non-serviceable component; it must be replaced as
an absorbent towel around the connection to absorb brake fluidRemove the brake hose from the master cylinder INSPECTING NOTE:
Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Inspect the pin securing the
brake lever for wear2Inspect the brake lever for elongation of the pivot hole3Inspect the reservoir for cracks and leakage4Inspect
the brake hose for cracks and deterioration and the condition of the fittings (threaded and compression)5Inspect the brakelight
switch for corrosion, cracks, missing or broken mounting tabs, or broken and frayed wiringNOTE: If the brakelight switch
is determined to be not serviceable, see Section 5 ! CAUTION Brake fluid is highly corrosiveDo not spill brake fluid on any