2004 Arctic Cat ATVs factory service and repair manual, Page 10Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 10

10Store the ATV indoors in level position Preparation For Storage Avoid storing outside in direct sunlight and avoid using
the air filter and housing cover Preparation After Storage Taking the ATV out of storage and correctly preparing it will
assure many miles and hours of trouble-free ridingArctic Cat recommends the following procedure to prepare the ATV1Clean
the ATV thoroughly2Clean the engineRemove the cloth from the exhaust system3Check all control wires and cables for signs
of wear or frayingReplace if necessary4Change the engineltransmission oil and filter 5On liquid cooled models, check the
coolant level and add properly mixed coolant as necessary6Charge the battery; then installConnect the battery cables7Check
the entire brake systems (fluid level, pads, etc, all controls, headlights, taillight, brakelight, and headlight aim; adjust
or replace as necessary8Tighten all nuts, bolts, cap screws, and screws making sure all calibrated nuts, cap screws, and
bolts are tightened to specifications9Check tire pressureInflate to recommended pressure as necessary If the interior of