2004 Arctic Cat ATVs factory service and repair manual, Page 20Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 20

4Loosen the clamp securing the air cleaner to the front boot; then loosen the clamp securing the air cleaner to the rear
the rear filter sleeve onto the air cleaner; then tighten the clamp securely4Install the front boot onto the air cleaner;
then tighten the clamp securely To check and adjust valveltappet clearance, use the following procedureIOn the 2501300, the
seat and air-intake snorkel must be removed for this procedureI NOTE: On the 4001500, the seat assembly, side panels, and
gas tank must be removed for this procedure 5Install the filter with foam wrap into the air cleaner; then tighten the clamp
securely 1Remove the timing inspection plug; then remove the tappet covers (for more detailed information, see SectionServicing
Top-Side Components)2Rotate the crankshaft to the TDC position on the compression strokeIAt this point, the rocker arms and