2004 Arctic Cat ATVs factory service and repair manual, Page 23Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 23

1Shift the transmission into neutral and set the brake lever lock2Elevate the front of the ATV on safety stand until the
not always be visibleDo not bend or obstruct the routing of the carburetor vent hoseMake certain that the vent hose is securely
connected to the carburetor and the opposite end is always openWhen installing the spark plug, be sure to tighten it securelyA
new spark plug should be tightened 112 turn once the washer contacts the cylinder headA used spark plug should be tightened
118114 turn once the washer contacts the cylinder head Adjusting Throttle Cable To adjust the throttle cable free-play, follow
this procedure1Slide the rubber boot away; then loosen the jam nut from the throttle cable adjuster MufflerSpark Arrester
The muffler has spark arrester which must be periodically cleanedAt the intervals shown in the Periodic Maintenance Chart,